DIAPHRAGM PUMPS APPLICATIONS
33 5 63 02 00 10|
Peristaltic pumps range
|INDUSTRY PRODUCTION OF PAINT :|
Pumping in paint industries presents many difficulties due to the specificities of pumped fluids: in the production process there are several types of media: paint, resins and solvents. Solvents are often flammable pumps must be ATEX, the solvents are highly volatile pneumatic pumps must have a maximum seal, paint and more generally high viscosity of the order of 10,000 cpo, diaphragm pumps must have capacity pumping a fluid of high visquosités
CERAMIC INDUSTRY PRODUCTION :
The ceramic industry is the industry that best suits the pumps pneumatic double diaphragm: in fact three types of fluids are used in the manufacturing process, the main one being that the slip is extremely abrasive fluid, viscosity and of high density.
Techni-flow diaphragm pumps are optimized for this type of application: they have a reinforced body and bolted to cope with the problem of abrasion and the profile of their membranes sentoprene greatly improves the life of the pump.
In this type of industry we also find small dimentions pumps in polypropylene email for spraying pumps, air-flow techniques have reduced pulse rate which improves the quality of spraying.
PACKAGING INDUSTRY :
The packaging industries are major consumers of pneumatic diaphragm pumps, mainly for transfers or spray adhesive. There are a variety of adhesives increasingly important, with widely varying characteristics, in this type of industry is asked to pumps having a good chemical resistance to many of the elements constituting it.
Our range of pump has a wide range of material able to face this diversity while maintaining a essential reduced cost.
CHEMICAL INDUSTRY :
The chemical industry uses the largest range of diaphragm pump, due to the large numbers of fluid used.
It contains chemically aggressive fluids, flammable fluids, abrasive, viscous fluids or highly volatile.
Whatever the application we can find in the range of diaphragm pumps technical solution flow. By mixing the materials available for the pump body and elastomers available for membranes, virtually all pumping problems find their solutions.
All industries related to environmental issues are growing rapidly, technologies used in different sectors rely heavily on the benefits of diaphragm pumps: pumping of viscous fluid: the sewage sludge can be highly viscous, abrasive and aggressive chemically pneumatic diaphragm pumps of large capacity are used in this case. For example, the model TFG800PTF body polypropylen bolted PTFE membrane with a maximum flow of water over 650l/mn which givessubstantial power reserves.
AUTOMOTIVE / TRUCK
Garages, cars and trucks mainly use small pneumatic double diaphragm pumps for pumping fluid type clean engine oil or engine oil, coolant (water glycolated), windshield washer, diesel, petrol, AdBlue, etc..
The main models used are pumps 1/4 "body acetal + PTFE membrane for pumping flammable fluids safely diaphragm pumps 1/2" TFG100PBN body buna polypropylen membranes for pumping waste oil. These pumps are appreciated for their extreme reliability and light weight, easy to handle and they have a multitude of applications in a Garage.